详情介绍

用途：

本机使用热熔胶喷出，附着在材料表面。通过后道压辊将两层材料进行压合贴合，常见的贴合材料有珍珠棉、无纺布、玻纤布、编织布、衬布、羊羔绒、麂皮绒、皮革、海绵等贴合牢度有要求的一些材料。

特点：
1、采用温度控制系统，确保喷胶头和胶水温度恒定，温差小于±2℃，确保产品门幅稳定；
2、采用较好加热系统，加热快，确保热熔效果稳定；
3、采用节能省电融胶箱，使温度不易流失；
4、喷涂型号可选，确保材料表面喷胶均匀，可调节胶水喷出是形式（线状、雾化）。
5、传动采用变频同步控制系统，确保车速与喷胶同步，使喷胶量控制均匀、稳定
6、特殊规格及配置可按产品要求来订制；

use:

This machine uses hot melt glue to spray and adhere to the surface of the material. The two layers of materials are pressed and bonded by the rear pressure roller. Common bonding materials include pearl cotton, non-woven fabric, glass fiber cloth, woven cloth, lining cloth, lamb velvet, suede, leather, sponge, etc. Fastness is required for some materials.

Features:

1. The temperature control system is adopted to ensure that the temperature of the spray head and the glue is constant, and the temperature difference is less than ±2°C to ensure the stability of the product width;

2. Adopt better heating system, fast heating, to ensure stable hot melting effect;

3. The use of energy-saving and electricity-saving melting plastic box, so that the temperature is not easy to lose;

4. The spraying model is optional to ensure that the glue is sprayed evenly on the surface of the material, and the form of glue spraying can be adjusted (linear, atomized).

5. The transmission adopts a frequency conversion synchronous control system to ensure that the speed of the vehicle is synchronized with the glue spray, so that the glue spray quantity is controlled evenly and stably

6. Special specifications and configurations can be customized according to product requirements;